LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. Install the TP sensor.

    Align the TP sensor with the throttle shaft.

  2. Fig 1: View Of TP Sensor
    GM10936Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the TP sensor screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  4. Fig 2: View Of TP Sensor Screws
    GM10935Courtesy of GENERAL MOTORS CORP.
  5. Connect the TP sensor electrical connector (1).
  6. Fig 3: View Of TP Sensor, IAC Motor, ECT Sensor, Control Port Injector Module & Engine Harness Clip Bolt
    GM782174Courtesy of GENERAL MOTORS CORP.
  7. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .