LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Drain the cooling system to a level below the sensor. Refer to Draining and Filling Cooling System (with HP2) or Draining and Filling Cooling System (without HP2) in Engine Cooling.
  2. Disconnect the engine coolant temperature (ECT) sensor electrical connector (5).
  3. Fig 1: View Of TP Sensor, IAC Motor, ECT Sensor, Control Port Injector Module & Engine Harness Clip Bolt
    GM782174Courtesy of GENERAL MOTORS CORP.
    NOTE: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.
  4. Remove the ECT sensor.
  5. Fig 2: View Of ECT Sensor
    GM246800Courtesy of GENERAL MOTORS CORP.