LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. Insert the air cleaner element.
  2. Install the air cleaner cover.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Fig 1: Air Cleaner Cover
    GM360820Courtesy of GENERAL MOTORS CORP.
  4. Tighten the air cleaner cover screws until snug.
  5. Install the outlet resonator to the MAT/IAT sensor.
  6. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.

    Tighten:  Tighten the clamp to 4 N.m (35 lb in).

  7. Fig 2: View Of Air Cleaner Outlet Duct Clamp
    GM360851Courtesy of GENERAL MOTORS CORP.