LEMON Manuals: Even more car manuals for everyone

Pinpoint Test D: U3003:17: Notes

Refer to Vehicle Dynamic Systems for schematic and connector information.

Normal Operation and Fault Conditions 

The ABS module, hydraulic pump and solenoid valves require an operating voltage between 10 and 17 volts. The ABS module receives this voltage from the front BJB and has a single ground circuit. An overcharging condition in the charging system results in the ABS module setting a DTC. This DTC may also set in the ABS module due to battery charging or vehicle jump starting events.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U3003:17 Battery Voltage: Circuit Voltage Above Threshold This DTC sets on-demand if the voltage supplied to the ABS module is above 17 volts.

Possible Causes