Power Steering - Overview
Advantages of electric power steering
- EPAS is only active when a steering movement occurs. This decreases the load on the engine and therefore reduces the fuel consumption.
- The system adjusts the power of the steering assistance specifically for every speed.
- Not sensitive to disturbances from the running gear which lead to vibrations at the steering wheel.
- Fewer components compared with hydraulic power steering. The hydraulic pump, hoses and reservoir are dispensed with.
- Environmentally friendly:
- no need to dispose of hydraulic fluid,
- escape of hydraulic fluid caused by leaks in the hydraulic system cannot occur.
Service instructions
NOTE:
The EPAS must not be dismantled! If a malfunction occurs, the complete steering gear must be replaced, together with the components of the EPAS.
NOTE:
The steering gear rubber boots, the track rods and the ball joints can be changed separately in service.
NOTE:
The EPAS motor cannot be replaced separately during service repairs. Under no circumstances
may the securing bolts of the motor be loosened, as this would change the tension of the toothed belt. The result would be breakage or slipping of the toothed belt.
NOTE:
The EPAS module must not be separately replaced during service repairs.
NOTE:
The steering torque sensor cannot be replaced separately during service repairs. In the event of a fault, the complete steering gear with the EPAS must be replaced.