LEMON Manuals: Even more car manuals for everyone

Pinpoint Test Aa : U0111:00: Notes

WARNING: This page is about a different variant/trim than selected.

Refer to Module Communications Network for schematic and connector information.

Normal Operation and Fault Conditions 

The PCM continuously monitors the CAN for messages from the BECM. This DTC sets when the PCM does not receive the BECM message within the defined amount of time.

Possible Sources 

DTC Fault Trigger Conditions 

DTC  Description  Fault Trigger Conditions 
U0111:00 Lost Communication With Battery Energy Control Module A After the PCM, BECM wake up the PCM did not detect a response from the BECM.