LEMON Manuals: Even more car manuals for everyone

Pinpoint Test AK : U0298:00: Notes

WARNING: This page is about a different variant/trim than selected.

Refer to Module Communications Network for schematic and connector information.

Normal Operation and Fault Conditions 

The PCM continuously monitors the CAN for messages from the DC to DC Converter Control Module (DC/DC). This DTC sets when the PCM does not receive the DC to DC Converter Control Module (DC/DC) message within the defined amount of time.

Possible Sources 

DTC Fault Trigger Conditions 

DTC  Description  Fault Trigger Conditions 
U0298:00 Lost Communication With The DC to DC Converter Control Module "A" After the PCM, DC to DC Converter Control Module (DC/DC) wake up the PCM did not detect a response from the DC to DC Converter Control Module (DC/DC).