Fuel Pump: Removal
WARNING:
Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures may be present and may be ignited. Failure to follow these instructions may result in serious personal injury.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: Gasoline and Gasoline-Ethanol Fuel Systems Health and Safety Precautions .
- Remove the fuel tank. Refer to: Fuel Tank .
- Remove the bolts for the fuel pump cover.
Torque: 71 lb.in (8 Nm)
-
NOTE: Fuel tank removed for clarity.
Disconnect the fuel lines and the electrical connector. Refer to: Quick Release Coupling .
- Remove and discard the fuel pump cover O-ring seal.
- Disconnect the fuel lines. Refer to: Quick Release Coupling
.
- Disconnect the ground wire from the fuel filter.
- Release the retainers and remove the fuel pump.