LEMON Manuals: Even more car manuals for everyone

Fuel Lines: Removal

GFD345496Courtesy of FORD MOTOR COMPANY
GFD345497Courtesy of FORD MOTOR COMPANY
GFD345498Courtesy of FORD MOTOR COMPANY
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures may be present and may be ignited. Failure to follow these instructions may result in serious personal injury.
NOTE: This procedure is considered a major service repair. For Ford warranty coverage, the vehicle must be returned to the Multimatic vehicle assembly and repair facility.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Gasoline and Gasoline-Ethanol Fuel Systems Health and Safety Precautions .
  2. Remove the rear frame structure and powertrain. Refer to: Rear Frame Structure and Powertrain .
    • Remove the lower bolts.

    • Loosen the top bolt and position aside the bracket.

    GFD345060Courtesy of FORD MOTOR COMPANY
  3. Remove the bolts and the RH access panel.
    GFD345061Courtesy of FORD MOTOR COMPANY
  4. NOTE: Engine bulk head and wire harness removed for clarity.
    NOTE: Wrap the fuel line connector with a shop towel to absorb any residual fuel pressure during the removal of the fuel line.

    Disconnect and remove the fuel line. Refer to: Quick Release Coupling .

GFD345507Courtesy of FORD MOTOR COMPANY