LEMON Manuals: Even more car manuals for everyone

Front Seat Backrest: Removal

NOTE: Power driver seat shown, other seats similar.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the front seat. Refer to: Front Seat .

    article seats 

    • NOTE: Follow the unique instructions or graphic for this step in installation.

      If equipped. Release the locking tab, remove and discard the height adjust handle.

    • Remove the clip and the recline handle.

    GFD185376Courtesy of FORD MOTOR COMPANY
  2. Remove the side shield screws.
    GFD185377Courtesy of FORD MOTOR COMPANY
    1. Release the side shield from the recliner.
    2. Slide the side shield forward and release it from the seat track.
    GFD185378Courtesy of FORD MOTOR COMPANY

    Power seats 

  3. Remove the side shield screws.
    GFD185379Courtesy of FORD MOTOR COMPANY
    1. Release the side shield from the recliner.
    2. Slide the side shield forward and release it from the seat track.
    GFD185380Courtesy of FORD MOTOR COMPANY
    1. Disconnect the seat switch electrical connector.
    2. Remove the side shield.
    GFD185381Courtesy of FORD MOTOR COMPANY

    All seats 

  4. Remove the screws and the recline cover.
    GFD185382Courtesy of FORD MOTOR COMPANY
  5. Disconnect the electrical connectors, release the connector pin-type retainers and position the wire harnesses aside.
    GFD185383Courtesy of FORD MOTOR COMPANY
  6. Detach the backrest cover straps and position the backrest cover upward.
    GFD185384Courtesy of FORD MOTOR COMPANY
  7. Release the wire harness retainer(s) from the seat track.
    GFD185385Courtesy of FORD MOTOR COMPANY
  8. Remove the screws and the inner side shield.
    GFD185386Courtesy of FORD MOTOR COMPANY
  9. NOTE: Follow the unique instructions or graphic for this step in installation.

    Remove the bolts and the backrest.

GFD185387Courtesy of FORD MOTOR COMPANY