LEMON Manuals: Even more car manuals for everyone

HO2S and CMS

NOTE: For HO2S  removal and installation, refer to HEATED OXYGEN SENSOR (HO2S) .
NOTE: If necessary, lubricate the CMS  with penetrating and lock lubricant to assist in removal.
NOTE: Apply anti-seize to the threads of the CMS  prior to installing.
NOTE: The correct torque wrench setting must be calculated when using the Exhaust Gas Oxygen Sensor Socket to install the CMS  . Refer to the Torque Wrench Adapter Formulas in the illustration below  .
G00468730
Fig 1: Exploded View Of Heated Oxygen Sensor And Catalyst Monitor Sensor
G07488417Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - RH HO2S  electrical connector
2 9G444 RH HO2S 
3 - RH CMS  electrical connector
4 9F472 RH CMS 
5 - LH CMS  electrical connector
6 9F472 LH CMS 
7 - LH HO2S  electrical connector
8 9G444 LH HO2S