Normal Operation and Fault Conditions
With the ignition ON, the Powertrain Control Module (PCM) sends messages to the Anti-Lock Brake System (ABS) module over the High Speed Controller Area Network (HS-CAN). If the Anti-Lock Brake System (ABS) module does not receive these messages within a certain time frame (less than 1 second), the Anti-Lock Brake System (ABS) module sets Diagnostic Trouble Codes (DTCs). For information on the messages sent to the Anti-Lock Brake System (ABS) module by the Powertrain Control Module (PCM), REFER to NETWORK MESSAGE CHART .
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0100:00 | Lost Communication With ECM/PCM A: No Sub Type Information | This Diagnostic Trouble Code (DTC) sets in continuous memory and on-demand if any one of the following messages is missing: transmission gear, All-Wheel Drive (AWD) torque, throttle position, cruise control status or brake pedal position. |