LEMON Manuals: Even more car manuals for everyone

Powertrain Calibration Information

Fig 1: Locating Powertrain Calibration Information
G06261163Courtesy of FORD MOTOR CO.
NOTE: Powertrain calibration information is limited to a maximum of 5 characters per line on the Vehicle Certification (VC) Label. Because of this, calibration identification consisting of more than 5 characters will wrap to the second line on the VC  label.

Powertrain calibration information is printed in the lower right corner of the VC  . Only the base calibration information is printed. Revision levels will not appear, however, they can be obtained through a scan tool using the most current software revision.

Fig 2: Identifying Powertrain Calibration Information Level
G06072750Courtesy of FORD MOTOR CO.
POWERTRAIN CALIBRATION INFORMATION LEVEL CODE DESCRIPTION CHART

Item Description
1 Model year (year in which calibration strategy was first introduced)
2 Vehicle code
3 Transmission code
4 Unique calibrations (designates different hardware to similar vehicles), example: tires or drive ratios
5 Fleet code (describes fleet to which the vehicle belongs), example: 6 - Evaporative Emission (EVAP)
6 Certification region (lead region where multiple regions are included in one calibration), example: A - US federal
7 Revision level (will advance as revisions occur), not printed on label

Model Year 

Model year code indicates the year in which the calibration code was introduced.

Vehicle Code 

The vehicle code indicates the vehicle line to which the code applies.

Transmission Code 

The transmission code identifies the type of transmission used.

Unique Calibration 

The Emissions/Corporate Average Fuel Economy/CO2 Compliance Department is responsible for assigning these calibration numbers. Unique identifications are assigned to cover similar vehicles to differentiate between tires, drive configurations, final drive ratios and other calibration-significant factors.

These 2 characters are chosen by the analyst to provide identifiable information unique to each calibration. For example, using the number 2 to denote a 2-valve engine versus using the number 4 to identify a 4-valve engine provides an easily identifiable difference.

Fleet Coding 

Identifies the fleet to which the vehicle belongs.

Certification Region 

When instances where multiple regions are included in one calibration, the lead region will be listed.