- No communication with the instrument cluster
|
- Central junction box (CJB) fuse(s):
- 33 (15A).
- 35 (10A).
- 41 (10A).
- 45 (10A).
|
|
|
|
- J1850 standard corporate protocol (SCP) communication network.
|
|
|
- Incorrect fuel gauge indication
|
|
|
|
|
|
|
|
|
- Incorrect oil pressure gauge indication
|
|
|
|
|
|
|
- Incorrect temperature gauge indication
|
|
|
- Engine coolant temperature sensor (ECT) (diesel only).
|
- J1850 standard corporate protocol (SCP) communication network.
|
|
|
- Powertrain control module (PCM).
|
- Incorrect transmission temperature gauge indication
|
|
|
- Transmission temperature sensor.
|
- Powertrain control module (PCM).
|
|
|
- The low fuel warning indicator is never/always on
|
|
|
|
|
- The speedometer is inoperative
|
|
|
|
|
- Anti-lock brake system (ABS) module.
|
- The tachometer is inoperative
|
|
|
|
|
|
|
- Trip odometer inoperative, speedometer OK
|
|
- VERIFY the trip odometer reset button is not binding. If OK, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER in this article. TEST the system for normal operation. refer to MODULE CONFIGURATION
for module configuration.
|
- Inaccurate configuration.
|
- The door ajar indicator is inoperative (chime is operative)/does not operate correctly
|
|
|
|
|
|
|
|
|
- The safety belt warning indicator is inoperative (chime is operative)/does not operate correctly
|
|
|
|
|
|
|
- Safety belt switch (part of the safety belt retractor).
|
- Inaccurate speedometer reading
|
|
|
- Anti-lock brake system (ABS) module.
|
|
|
- Inaccurate axle size configuration.
|
- The anti-lock brake system (ABS) warning indicator is never/always on
|
|
|
|
|
|
|
|
|
- The brake warning indicator is never on
|
|
|
|
|
|
|
- Brake warning indicator relay.
|
- Anti-lock brake system (ABS) module.
|
- Brake fluid level switch.
|
|
|
- The brake warning indicator is always on
|
|
|
- Brake fluid level switch.
|
|
|
- Anti-lock brake system (ABS) module.
|
- Hydromax module (if equipped).
|
|
|
- Malfunction indicator lamp (MIL) indicator is never on
|
|
|
|
|
|
|
- J1850 standard corporate protocol (SCP) communication network.
|
- Powertrain control module (PCM).
|
- Malfunction indicator lamp (MIL) indicator is always on
|
- Diagnostic trouble code (DTC) related concern(s).
|
|
- The charging system indicator is never on
|
- Central junction box (CJB) fuse 45 (10A).
|
|
|
|
|
|
|
|
|
|
- The charging system indicator is always on
|
|
|
- Generator (charging system).
|
- The air bag indicator warning is never/always on
|
|
|
|
|
|
|
- Air bag diagnostic monitor.
|
- High beam indicator is never on
|
|
|
|
|
|
|
- The LH turn indicator is never on
|
|
|
|
|
|
|
- The RH turn indicator is never on
|
|
|
|
|
|
|
- The 4X4 high/LOW RANGE indicator is never/always on
|
|
|
|
|
|
|
- Inaccurate instrument cluster configuration.
|
- The wait to start indicator is never/always on - diesel only
|
|
|
- Powertrain control module (PCM).
|
- The water in fuel indicator is never/always on - diesel only
|
|
|
|
|
|
|
|
|
- The speed control indicator is never/always on
|
|
|
|
|
|
|
|
|
- The theft indicator is never/always on
|
|
|
|
|
- Passive anti-theft (PATS) module.
|
|
|
- The check fuel cap indicator is inoperative/always on
|
|
|
- Powertrain control module (PCM).
|
|
|
- The CHECK GAGE warning indicator is inoperative/always on
|
- CHECK GAGE indicator bulb.
|
|
|
|
|
|
- The check air filter indicator is never/always on - diesel only
|
- Check air filter indicator bulb.
|
|
|
|
|
|
|
|
- The instrument cluster is inoperative
|
- Central junction box (CJB) fuse(s):
- 33 (15A).
- 35 (10A).
- 41 (10A).
- 45 (10A).
|
|
|
|
|
|
- The tow haul indicator is inoperative
|
|
|
|
|
- Powertrain control module (PCM)
|
|
|