LEMON Manuals: Even more car manuals for everyone

Crankshaft End Play

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL EQUIPMENT

Dial indicator
Dial indicator fixture
    NOTE: Carry out the following operation for vehicles with Zetec-E and 2.3L engines only. Dismantling the crank gear is not permitted on Zetec-SE engines.
    Fig 1: Measuring Crankshaft End Play
    G03191652Courtesy of FORD MOTOR CO.
  1. Determine the end float.
    • Attach the dial indicator and bracket.
    • Determine the end float by raising the crankshaft with the aid of a screwdriver.
    • If necessary, correct the end float by using new thrust half washers.