LEMON Manuals
: Even more car manuals for everyone
Home
›
Ford
›
2000
›
Focus ZTS, Automatic
›
Repair and Diagnosis
›
External Pages
›
Different car
›
Section 366 (Anti-Lock Control System - Traction Control System & Stability Assist System)
›
Diagnosis And Testing
›
Anti-Lock Control - Stability Assist
›
Pinpoint Tests
›
Pinpoint Test K: The Stability Assist System Cannot Be Disabled
Pinpoint Test K: The Stability Assist System Cannot Be Disabled
WARNING:
This page is about a different car, the 2003 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Use the correct probe adaptor(s) when making measurements. Failure to use the correct probe adaptor(s) may damage the connector.
Fig 1: Pinpoint Test K: Stability Assist System Cannot Be Disabled (Step K1-K3)
Courtesy of FORD MOTOR CO.