Test B: Forward/Rearward Function Does Not Work Properly
- Check Forward/Backward Operation
Disconnect power seat control switch connector. Using jumper wires, connect positive battery voltage to Red/White wire of power seat control switch harness connector. Momentarily connect Yellow/White wire of power seat control harness connector to ground. Seat should operate smoothly. Reverse jumper wires at harness connector. Seat should operate smoothly in opposite direction. If seat does not operate as specified, go to next step. If seat operates as specified, go to TEST A: POWER SEAT COMPLETELY INOPERATIVE.
- Check Forward/Backward Circuits For Open
Disconnect seat motor connector. Check resistance in Red/White and Yellow/White wires, between power seat control switch harness connector and seat motor harness connector. If resistance is less than 5 ohms, go to next step. If resistance is 5 ohms or greater, repair open in appropriate wire(s).
- Check Forward/Backward Circuits For Short
Check continuity in Red/White and Yellow/White wires, between power seat control switch harness connector and ground. If continuity exists, repair short in appropriate wire(s). If continuity does not exist, replace seat motor.