LEMON Manuals: Even more car manuals for everyone

Test C: All Door Locks Work From One Switch Only

  1. Turn key OFF. Locate and disconnect the power key lock switch connector or the power door lock switch connector which will not activate the locks. Measure the voltage on the White/Green wire at the switch connector in question. Is the voltage greater than 10 volts? If yes, goto next step. If no, service the White/Green wire.
  2. Turn key OFF. Disconnect the power key lock switch connector or the power door lock switch connector in question. Measure the resistance between the White/Green and Green/Black terminals of the switch in question. Place the key in the door key cylinder if the switch being tested is a power key lock switch and turn the key to the lock and unlock position. Depress the door lock switch in the lock and unlock position if the switch being tested is a door lock switch. Is the resistance less than 5 ohms with the switch in the lock position and approximately 4,600 ohms with the switch in the unlock position? If yes, service the Green/Black wire in question for open. If no, replace the switch in question.