Test A: One Door Lock Inoperative
- Turn key OFF.
- Disconnect the left and right power door lock actuator connectors and the power door lock relay connector.
- Measure the resistance of the (Green) and (Red) wires between the power door lock relay connector and the power door lock actuator connectors.
- Measure the resistance of the (Green) and (Red) wires between the power door lock relay connector and ground.
- Are the resistances less than 5 ohms between the power door lock relay and the power door lock actuators, and greater than 10,000 ohms between the power door lock relay and ground? If yes, replace the front door latch that does not work. If no, service the wire(s) in question.