LEMON Manuals: Even more car manuals for everyone

Rack & Pinion Preload

NOTE: Readjusting rack yoke preload will seldom cure hard steering or poor power steering wheel return. Check for damage from hitting a curb or tight components.

Remove rack and pinion. See RACK & PINION R & I  under REMOVAL & INSTALLATION. Measure pinion torque using an inch-pound torque wrench and Pinion Torque Adapter (T88C-3504-BH). Torque should be 88.5-123.9 INCH lbs. (10-14 N.m). If pinion nut is not within specification, loosen lock nut.

Using Yoke Torque Gauge (T88C-3504-AH), torque adjust cover to 7.2 ft. lbs. (9.8 N.m) and then loosen. Torque adjust cover to 3.6 ft. lbs. (4.9 N.m) and loosen adjust cover 45 degrees. Using yoke lock nut wrench, tighten to 36-43 ft. lbs. (49-58 N.m).