LEMON Manuals: Even more car manuals for everyone

1.3/1.6/2.2L Eng Initial Cold Start Stall (89-13-5)

Publication date: 1970-01-01
Reference number: 89-13-5

1.3/1.6/2.2L ENG INITIAL COLD START STALL

1.3/1.6/2.2L ENG INITIAL COLD START STALL

TECHNICAL SERVICE BULLETIN

Reference Number(s): 89-13-5

APPLICATION

1989 Ford Festiva, Probe; 1989 Mercury Tracer

SUBJECT

Stall During Initial Cold Start - EEC Processor.

REFERENCE

Ford Technical Service Bulletin No. 89-13-5

CONDITION & CAUSE

The EEC processor may cause an engine that starts and runs with the key in the "crank" position, but stalls when the key is released to the "run" position. This occurs only during initial cold start in ambient temperatures of 32°F and below (0°C and below). The stall condition is not present when the engine is warmed up. The affected vehicle dates are as follows:

* 1989 Festiva built from 11/1/88 to 1/4/89

* 1989 Tracer built from 11/1/88 to 1/30/89

* 1989 Probe built from 11/1/88 to 1/3/89

REPAIR

Install a new EEC Processor that was not built between date codes "11 H1 to 12 H 14" (11/1/88 to 12/14/88), Figure 1.

Fig 1: EEC Processor Date Code Information
G90J08369Courtesy of FORD MOTOR CO.
PARTS APPLICATION

Part Number Part Name
E9BZ-12A650-B EEC Processor
E8GY-12A650-F EEC Processor
E92Z-12A650-E EEC Processor