LEMON Manuals: Even more car manuals for everyone

Inspection & Reassembly

  1. Check pulley assembly, cam ring, rotor and vanes for wear. Check pump cover and pump body for abrasion. Check flow control valve for clogging.
  2. Apply ATF (Dexron) fluid to "O" rings and vanes. Reassemble in reverse order of disassembly. Install oil seal into pump body with Installers (MB990925-01) and (MB990938-01). Install vanes into rotor in right direction. See Fig 1 .
Fig 1: Installing Vanes into Rotor of Power Steering Pump
G51308Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
NOTE: Disassembly and reassembly procedures are not available for all models. See Figure .