LEMON Manuals: Even more car manuals for everyone

Heater, Engine Block: Installation

  1. Thoroughly clean the cylinder block core hole and the block heater seat.
    GC0143810Courtesy of CHRYSLER GROUP, LLC
  2. Insert the block heater assembly (2) into the block.
  3. With the block heater fully seated, tighten the bolt (3) to 12 N.m (106 in. lbs.) torque.
  4. Connect the power cord to the block heater (2).
  5. Install the starter. Refer to 6.2L .
  6. Connect the negative battery cable.