LEMON Manuals: Even more car manuals for everyone

Draining The Cooling System

NOTE:

Make sure the coolant is not HOT and under pressure. 

NOTE:

DO NOT WASTE reusable coolant. If the solution is clean, drain the coolant into a clean container for reuse.

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. When the engine is cold, remove the filler cap from the pressurized coolant bottle.
    Fig 1: Quick-Connect Coupling
    GC0172014Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Recover the coolant into a suitable container.

    NOTE:

    The radiator is NOT  equipped with a draincock.

  3. Position a drain pan under the lower radiator hose.
  4. Disengage the quick-connect coupling (1) and carefully remove the lower radiator inlet hose from the radiator.
    Fig 2: Drain Valve
    GC0164741Courtesy of CHRYSLER GROUP, LLC
  5. Open the drain valve (1) on the right rear of the radiator.
    Fig 3: Bleed Valve On Return Line
    GC0165272Courtesy of CHRYSLER GROUP, LLC
  6. If equipped, open the bleed valve (1) on the return line from the heater core.