LEMON Manuals: Even more car manuals for everyone

Diagnostic Test

PCM PROGRAMMED WITH INCORRECT SOFTWARE 

  1. Turn the ignition on.
  2. Program the PCM in accordance with the Service Information. Refer to MODULE PROGRAMMING .
  3. Start the engine.
  4. Allow the engine to reach normal operating temperature.
  5. With a scan tool, select read the active DTCs.

    Does the scan tool display U0300-INTERNAL CONTROL MODULE SOFTWARE INCOMPATIBILITY?

    Yes 

    No 

    • The Powertrain Control Module (PCM) has been successfully programmed. Test is complete.
    • Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .