LEMON Manuals: Even more car manuals for everyone

Heater, Engine Block: Installation: 5.7L/6.4L

WARNING: This page is about a different car, the 2013 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Thoroughly clean the cylinder block core hole and the block heater seat.
    Fig 1: PIA Bolt, Engine Block Heater Element & PIA Bolt
    GC0143810Courtesy of CHRYSLER GROUP, LLC
  2. Insert the block heater assembly (1) into the block.
  3. With the block heater fully seated, tighten bolt (1) to 12 N.m (106 in. lbs.).
  4. If equipped, install lower engine cover.
  5. Lower vehicle.