LEMON Manuals: Even more car manuals for everyone

Switch, Memory: Installation: Installation

Fig 1: Two Retaining Tabs, Memory Seat Switch & Driver Door Trim Panel
GC0146080Courtesy of CHRYSLER GROUP, LLC
  1. Install the memory seat switch (2) into the driver door trim panel (4). Push the switch firmly into the trim panel until the retaining tabs (1 and 3) are fully engaged.
    Fig 2: Wire Harness Connector & Memory Seat Switch
    GC0146079Courtesy of CHRYSLER GROUP, LLC
  2. Connect the wire harness connector (1) to the memory seat switch (2).
  3. Install the driver door trim panel. Refer to PANEL, DOOR TRIM, INSTALLATION .
  4. Reconnect the negative battery cable.
  5. Using a scan tool, perform the Power Seat System Verification test. Refer to STANDARD PROCEDURE .
  6. Verify proper memory seat system operation.