Thermostat-Engine Coolant: Installation: Installation-4.0L
| 1 - UPPER RADIATOR HOSE |
| 2 - HOSE CLAMP |
| 3 - THERMOSTAT HOUSING MOUNTING BOLT |
| 4 - THERMOSTAT HOUSING |
| 5 - UPPER RADIATOR HOSE TUBE |
| 6 - UPPER RADIATOR HOSE TUBE MOUNTING NUTS |
- Make sure jiggle pin is at the 12 O'clock position. Position thermostat and thermostat housing lower intake manifold.
- Install thermostat housing bolts. Tighten bolts to 35 N.m (25 ft. lbs.).
- Install upper radiator hose onto thermostat housing
- Position upper radiator hose tube and install mounting nuts. Tighten nuts to 9 N.m, (85 in. lbs.).
- Install upper intake manifold. Refer to INSTALLATION .
- Install air cleaner housing. Refer to INSTALLATION .
- Fill cooling system. See STANDARD PROCEDURE .