Engine Cooling System: Engine: Pump-Water: Removal: Removal-4.0L
- Disconnect negative battery cable.
- Remove air filter housing. Refer to REMOVAL .
- Drain cooling system. See STANDARD PROCEDURE .
- Remove coolant recover container. See REMOVAL .
- Remove viscous radiator fan. See REMOVAL .
- Remove RH engine mount through bolt.
- Raise engine assembly.
- Remove front A/C compressor front mounting nuts and studs
- Remove accessory drive belt bracket.
- Remove engine timing belt. Refer to REMOVAL
.
1 - M8 FASTENERS (APPLY THREAD SEALANT) 2 - M10 FASTENERS 3 - M6 FASTENERS 4 - M10 FASTENERS (STUD/NUT) - Remove water pump mounting bolts (3).
- Remove water pump.
- Clean mounting surface.