LEMON Manuals: Even more car manuals for everyone

Section 1 (Clutch System): Cylinder-Slave: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Hydraulic Line, Slave Cylinder & Mounting Nuts
GC0061314Courtesy of CHRYSLER LLC
  1. Install slave cylinder (2) in transmission.
  2. Install slave cylinder nuts (3) and tighten to 23 N.m (17 ft. lbs.).
  3. Install hydraulic line (1) to slave cylinder (2).
    NOTE: Verify O-ring is on hydraulic line.
  4. Bleed hydraulic system.