LEMON Manuals: Even more car manuals for everyone

Rear Seat Belt & Retractor: Installation

  1. Position rear seat belt retractor in trunk compartment.
  2. Push seat belt bezel and buckle stab through access hole in rear shelf trim panel.
  3. Install bolt attaching retractor to rear seat closure panel. 40 N.m (30 ft. lbs.) torque.
  4. Install bolt attaching seat belt lower anchor to floor. Tighten the seat belt bolt to 40 N.m (30 ft. lbs.) torque.
  5. Install rear seat closure panel silencer pad.
  6. Install seat belt bezel to the rear shelf trim panel.
  7. Install rear seat cushion and back.