LEMON Manuals: Even more car manuals for everyone

Manifold Tune Valve: Installation

  1. Connect the electrical connector to the MTV and bracket. See Figure.
    NOTE: When removing the MTV do not loose the spring that is between the valve and intake manifold.
  2. Install the MTV. Align the slot in the valve with the tab on the intake manifold. Do not forget to install the spring.
  3. Install the 2 bolts to the MTV. See Figure.
  4. Install the bracket. See Figure.
  5. Install the 3 bolts for the rear power steering bracket.
  6. Untie the upper radiator hose.
  7. Connect the negative battery cable.