LEMON Manuals: Even more car manuals for everyone

Fuel Pressure Regulator: Installation

Lightly lubricate the O-rings with engine oil.

  1. Insert Filter/Regulator into the opening in the fuel pump module, align the two hold down tabs with the flange.
  2. While applying downward pressure, rotate the Filter/Regulator clockwise until the spring tab engages the locating slot. See Figure.
  3. Connect the fuel line to the Filter/Regulator.
  4. Lower vehicle from hoist.
Fig 1: Spring Tab In Locating Slot
GC0019410Courtesy of DAIMLERCHRYSLER CORP.
1 - FUEL FILTER/PRESSURE REGULATOR
2 - SPRING TAB
3 - LOCATING SLOT