Removal - 2.0L
- Disconnect battery negative cable. See Fig 1.
Courtesy of DAIMLERCHRYSLER CORP.
- Loosen the jam nut and adjustment bolt.
- Raise vehicle and support.
- Remove accessary drive splash shield. See Fig 2.
Courtesy of DAIMLERCHRYSLER CORP.
- Loosen the lower mounting bolt.
- Remove the generator drive belt.
- Disconnect the generator field circuit wiring connector. Push the RED
locking tab to release.
- Remove the B+ terminal nut and wire.
- Remove the upper and lower mounting bolt and move generator off of pivot bracket. See Fig 3.
- Remove pivot bracket.
Courtesy of DAIMLERCHRYSLER CORP.
- Remove Generator through wheel well. See Fig 4.
Courtesy of DAIMLERCHRYSLER CORP.