Test NTC-17B - Checking Minimum Idle Airflow
NOTE:
Perform TEST NTC-16A before proceeding.
- Turn ignition off. Disconnect PCV valve hose from PCV valve. Plug PCV valve hose.
- Disconnect 3/16" idle purge hoses from both throttle. Install an Orifice (6457) (orifice size is .125") to each purge nipple on both throttle. Go to next step.
- Start engine. Allow engine to reach normal operating temperature. Using scan tool, actuate minimum airflow. If vehicle odometer has less than 1000 miles, go to step 5). If vehicle odometer has 1000 miles or more, go to next step.
- If engine speed is 750-1100 RPM, minimum airflow is normal. Test is complete. If engine speed is not 750-1100 RPM, refer to the ADJUSTMENTS - 3.5L article for further diagnosis on minimum idle airflow.
- If engine speed is 700-1100 RPM, minimum airflow is normal. Test is complete. If engine speed is not 700-1100 RPM, refer to the ADJUSTMENTS - 3.5L article for further diagnosis on minimum idle airflow.