LEMON Manuals: Even more car manuals for everyone

Circuit Description

The Manifold Absolute Pressure (MAP) sensor measures changes in intake manifold pressure which result from engine load (intake manifold vacuum) and rpm changes. The MAP sensor converts these changes into a voltage output. The powertrain control module (PCM)/engine control module (ECM) sends a 5-volt reference voltage to MAP sensor. As intake manifold pressure changes, output voltage of MAP sensor also changes. A low voltage (high vacuum) output of 1-2 volts is present at idle. A high voltage (low vacuum) output of 4.0-4.8 volts is present at wide open throttle. The MAP sensor is also used under certain conditions to measure barometric pressure. This allows PCM/ECM to make adjustments for altitude changes. The PCM/ECM uses MAP sensor for fuel delivery and ignition timing changes.