LEMON Manuals: Even more car manuals for everyone

Engine Cooling System: Engine: Thermostat: Removal: 3.6L

WARNING:

Do not loosen radiator draincock with system hot and pressurized. Serious burns from coolant can occur.

CAUTION:

The Thermostat and housing is serviced as an assembly. Do not remove the thermostat from the housing, damage to the thermostat may occur.

NOTE:

Do not waste reusable coolant. If solution is clean, drain coolant into a clean container for reuse.

NOTE:

If thermostat is being replaced, be sure that replacement is specified thermostat for vehicle model and engine type.

  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner body tray. Refer to BODY, AIR CLEANER, REMOVAL .
  3. Drain cooling system. Refer to STANDARD PROCEDURE .
    GC0159466Courtesy of CHRYSLER GROUP, LLC
  4. Loosen the clamp (3) that secures the upper radiator inlet hose to the thermostat (2).
  5. Remove the bolts (4) that secure the thermostat to the coolant crossover.
  6. Remove the thermostat housing (2) From the inlet hose.