Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Hub And Bearing Mounting Bolts | 95 | 70 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Hub Nut | 200 | 148 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Lower Ball Joint Pinch Bolt and Nut | 60 Plus 48° | 44 Plus 48° | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Lower Control Arm Horizontal Pivot Bolt and Nut | 100 Plus 135° | 74 Plus 135° | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Lower Control Arm Vertical Bolt and Nut | 75 Plus 80° | 55 Plus 80° | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Stabilizer Bar to Crossmember Bolts | 65 | 48 | - | |
| Stabilizer Link to Stabilizer Bar Nut | 48 | 35 | - | |
| Stabilizer Link to Strut Nut | 50 | 37 | - | |
| Strut Rod to Strut Mount Nut | 70 | 52 | - | |
| Strut to Knuckle Bolt and Nut | 110 | 81 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Splash Shield Bolts - Front | 8 | - | 71 |