LEMON Manuals: Even more car manuals for everyone

Arm, Lower Control: Removal

NOTE:

Before proceeding. Refer to FRONT, WARNING .

NOTE:

Removal process is the same for both sides of the vehicle.

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to REMOVAL .
  3. Remove the engine belly pan. Refer to BELLY PAN, REMOVAL .
    GC0162704Courtesy of CHRYSLER GROUP, LLC
  4. Remove the lower ball joint pinch bolt (1) and nut from the knuckle.
    NOTE:

    Use care when separating the ball joint stud from the knuckle so the ball joint boot (3) does not get damaged.

  5. Separate the lower control arm (2) from the knuckle by prying down with a pry bar.
  6. Remove the lower load beam. Refer to LOAD BEAM, LOWER, REMOVAL .
    GC0162707Courtesy of CHRYSLER GROUP, LLC
  7. Remove the horizontal bolt (2) attaching the lower control arm (5) to the front suspension crossmember (1).
  8. Remove the vertical bolt (3) attaching the lower control arm (5) to the front suspension crossmember (1).
  9. Remove the lower control arm (5) from the front suspension crossmember (1).