LEMON Manuals: Even more car manuals for everyone

2.4L Torque Specifications

WARNING: This page is about a different car, the 2016 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
2.4L TORQUE SPECIFICATIONS

DESCRIPTION N.m Ft. Lbs. In. Lbs. NEW FASTENER *
Accessory Drive Belt Tensioner Bolt 26 19 -  
Accessory Drive Belt Idler Pulley Bolt 28 21 -  
Block Heater 2 - 21  
Condenser to Radiator 6 - 53  
Coolant Reservoir 9 - 80  
Coolant Reservoir Return Tube to Airbox Nut 16 - 142  
Coolant Reservoir Supply Tube Nut to Stud 9 - 80  
Coolant Reservoir Supply Tube to Ball Stud Nut 5 - 44  
Coolant Return Tube to Water/Coolant Pump Inlet Pipe 45 33 -  
Coolant Return Tube to Oil Filter Housing 40 30 -  
Coolant Supply Tube to Oil Filter Housing 9 - 80  
Coolant Supply Tube to Thermostat Housing 9 - 80  
Engine Coolant Temperature (ECT) Sensor 7 + 720° (two complete rotations) - 62 + 720° (two complete rotations)  
Fan Shroud to Radiator Mounting 6 - 53  
Heater Hose to Transmission Mount 9 - 80  
Radiator Lower Isolator Bracket to Crossmember 8 - 70  
Thermostat Housing 10 - 89  
Transmission Oil Cooler Line Bracket 9 - 81  
Transmission Oil Cooler to Condenser 9 - 81  
Water/Coolant Pump Bolts and Nut 10 - 89  
Water/Coolant Pump Inlet Tube 9 - 80  
Water/Coolant Pump Inlet Pipe Support Bracket Bolt 10 - 89  
*NEW FASTENER:  Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications.