Sensor, Coolant Temperature: Installation: 2.4L
WARNING: This page is about a different car, the 2016 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
- Install the engine coolant temperature sensor (2) and tighten the sensor to the proper specification. Refer to SPECIFICATIONS .
- Connect the connector.
- Install the PCM mount (3) to the battery tray (1).
- Install the PCM mount bolts (2 & 4).
- Install the PCM. Refer to MODULE, POWERTRAIN CONTROL, INSTALLATION .
- Install the battery. Refer to BATTERY, INSTALLATION .
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Install the engine cover.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.