LEMON Manuals: Even more car manuals for everyone

Heater, Engine Block: Installation: 3.6L

WARNING: This page is about a different car, the 2016 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Block Heater
GC0159337Courtesy of CHRYSLER GROUP, LLC
  1. Clean block core hole (1) and heater seat.
  2. Insert heater block (4) assembly.
  3. With block heater seated, tighten bolt (3) to the proper specification to assure a positive seal. Refer to SPECIFICATIONS .
  4. Install power cord plug to block heater.
  5. Install the generator (2). Refer to GENERATOR, INSTALLATION .