LEMON Manuals: Even more car manuals for everyone

Charging System (Service Information): Generator: Removal: 2.4L

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine cover.
    Fig 1: Accessory Drive Belt Routing And Pulley Identification - 2.4L Gas
    GC0153811Courtesy of CHRYSLER GROUP, LLC
  3. Remove the accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL .
    GC0156074Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the field generator harness connector (3).
  5. Remove the B+ cable from the generator stud (2).
  6. Remove the upper generator bolt (1).
  7. Remove the lower generator bolts (4).