LEMON Manuals: Even more car manuals for everyone

Module, Radio Frequency (RF Hub): Removal

GC0156086Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the trim panel from the rear shelf. Refer to PANEL, REAR SHELF, REMOVAL .
  3. Remove the two push-in plastic fasteners that secure the Radio Frequency Hub Module (RFHM) to the shelf panel support.
  4. If the vehicle is so equipped, disconnect the remote start antenna (3) connector from the RFHM.
  5. Disconnect the body wire harness connectors (1, 2) from the RFHM.
  6. Remove the RFHM from the vehicle.