LEMON Manuals: Even more car manuals for everyone

Module, Park Assist: Removal

GC0162520Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative cable from the battery.
  2. Remove the trim panel from the lower deck opening sill in the trunk area. Refer to CARPET, FLOOR, REMOVAL .
  3. Partially remove the wheel house carpet from the left side of the lower deck lid opening inner closure panel (1) within the trunk to access the Park Assist Module (PAM) (3) (also known as the ParkTronic System/PTS module), which is located below the left tail lamp.
  4. Disconnect the two or three body wire harness connectors (4) from the PAM connector receptacles.
  5. Remove the two plastic push-in fasteners (2) that secure the PAM to the lower deck opening inner closure panel.
  6. Remove the PAM from the vehicle.