Module, Door: Installation
- Position the door control module to the front door hardware module carrier.
- Install and tighten the two screws (3) that secure the door control module to the front door hardware module carrier. Tighten the screws securely.
- Reconnect each of the electrical connectors (2) to the connector receptacles of the door control module (1).
- With the DDM (1) securely in place and reconnect, install the lower trim panel to the inside of the front door. Refer to PANEL, DOOR TRIM, INSTALLATION .
- Reconnect the battery negative cable.
- Perform the manual relearn procedure. Refer to MODULE, DOOR, MODULE PROGRAMMING .