LEMON Manuals
: Even more car manuals for everyone
Home
›
Chrysler
›
2010
›
300 Limited, RWD
›
Repair and Diagnosis
›
Engine Performance
›
Ignition System
›
Ignition Control (Service Information)
›
SENSOR, Knock
›
Removal
›
3.5L
SENSOR, Knock: Removal: 3.5L
Fig 1: KNOCK SENSOR CONNECTOR
Courtesy of CHRYSLER LLC
Disconnect and isolate the negative battery cable.
Remove the upper intake manifold. Refer to
Engine/Manifolds/MANIFOLD, Intake - Removal
Disconnect the electrical connector.
Fig 2: KNOCK SENSOR LOCATION
Courtesy of CHRYSLER LLC
Remove the knock sensor.