LEMON Manuals: Even more car manuals for everyone

Fuel Injector - 4.0L

Fig 1: Fuel Injector O-Ring
GC0000403Courtesy of CHRYSLER LLC
  1. Lightly lubricate the fuel injector O-rings with a couple drops of clean engine oil.
  2. Install retaining clips on fuel injectors.
    Fig 2: Installing Fuel Injector
    GC0000405Courtesy of CHRYSLER LLC
  3. Push injectors into fuel injector rail until clips are in the correct position.
    Fig 3: Fuel Rail - 4.0L
    GC0049839Courtesy of CHRYSLER LLC
  4. Lightly lubricate the fuel injector O-rings with a couple drops of clean engine oil.
    Fig 4: Fuel Rail Bolts 4.0L
    GC0049840Courtesy of CHRYSLER LLC
  5. Position fuel rail over cylinder heads, and push rail into place. Tighten fuel rail mounting bolts to 28 N.m (250 in. lbs.) torque.
  6. Connect the fuel supply tube quick connect fitting to the fuel rail.
  7. Connect and lock the electrical connectors to the fuel injectors.
  8. Install intake manifold plenum, refer to INSTALLATION .
  9. Connect negative cable to battery.