LEMON Manuals: Even more car manuals for everyone

Engine Coolant Temperature Sensor: Removal: 2.4L

WARNING: Hot, pressurized coolant can cause injury by scalding. Cooling system must be partially drained before removing the coolant temperature sensor.
  1. Drain the cooling system below thermostat level. (Refer to COOLING - STANDARD PROCEDURE) 
  2. Disconnect coolant temperature sensor electrical connector.
  3. Remove coolant temperature sensor. See Fig 1.
Fig 1: Engine Coolant Temperature Sensor - 2.4L
GC0024425Courtesy of DAIMLERCHRYSLER CORP.
1 - MAP SENSOR
2 - COOLANT TEMPERATURE SENSOR