Seat Belt Switch: Operation
The seat belt switch is designed to provide a status signal to the seat belt switch sense input of the Occupant Restraint Controller (ORC) indicating whether the driver side front seat belt is fastened. The ORC uses the seat belt switch input to determine the status of the driver side front seat belt. The ORC then sends electronic messages to the Instrument Cluster to control the seat belt indicator based upon the status of the seat belt switch input. If equipped the optional Occupant Classification System (OCS), the same will be true for the passenger side front seat belt.
The seat belt switch receives a supply current from the ORC, and the ORC senses the status of the driver side front seat belt through its pigtail wire connection to the airbag overlay wire harness. The ORC also monitors the condition of the seat belt switch circuit and will illuminate the airbag indicator in the cluster then store a Diagnostic Trouble Code (DTC) for any fault that is detected in the seat belt switch circuit. For proper diagnosis of the seat belt switch, a scan tool and the appropriate diagnostic information is required.